[chan-capi-users] hi @ all

Marcel Silberhorn m.silberhorn at interexa.de
Mon Dec 4 23:11:25 UTC 2006


*yehaaa!*
thanks mate ;) working fine!

With kind regards,
~Marcel

P.S: did I read over some posts/notices or is this not yet documentated?

Zitat Armin Schindler <armin at melware.de>:
> Hi Marcel,
>
> this is very simple, since version 0.7 of chan-capi, it is not allowed to
> configure multi-controller interfaces.
> You added [ISDN1] with controllers 1,2,3, but you need to add
> three interfaces for every controller one with 2 devices each:
> [ISDN1]
> controller=1
> devices=2
> ...
>
> [ISDN2]
> controller=2
> devices=2
> ...
>
> [ISDN3]
> controller=3
> devices=2
> ...
>
>
> Armin
>
> On Mon, 4 Dec 2006, Marcel Silberhorn wrote:
>>
>> sure, in attach you'll find a callin.log, witch will give you   
>> details to first
>> connect from mobile to PBX. Second try just a few seconds lator will fail!
>>
>> in second log (callout.log) you'll see two callouts just in time.
>>
>> one minute lator I tried to phone myself => succeed. Second try failed (as
>> above)
>>
>> number 12345 is the base MSN, 56 my DID, 56789, 98765 & 016012345678 are
>> outgoing / incoming numbers
>>
>> I attached capi.conf too.
>>
>> thx so far,
>> ~Marcel
>>
>> P.S: ok, startup-log is attached too ;)
>>
>>>
>>> Can you please provide a log with
>>> set verbose 5
>>> capi debug
>>> to see what is really going on?
>>>>
>>>> If someone's out there with similar problems or if this is a well
>>>> known "bug", any suggestions are welcome ;)


More information about the Chan-capi-users mailing list