[chan-capi-users] Diva BRI can't dial out

[Jim Hickstein]

Jim Hickstein wrote:
> In trying once again to get my Diva 4BRI-8M PCI 2.0 card to work with my 
> NI-5ESS, I rebuilt the entire system under it (including making new 
> Asterisk config files), and now I can get Asterisk to answer a call 
> coming in the BRI, but not to make a call going out.  I hope I'm just 
> doing something wrong in the configuration.
> 
> ---
> 
> Here's what I have:

Also, capi.conf:

; ----------------------------------------------------------------------
;  CONFIGURATION SCRIPT FOR EICON DIVA ISDN ADAPTERS
;  THIS SCRIPT WAS GENERATED AUTOMATICALLY BY
;  /usr/lib/eicon/divas/Config
; ----------------------------------------------------------------------

[general]
; ----------------------------------------------
; /usr/lib/eicon/divas/chancapi.general
; ----------------------------------------------
nationalprefix=1        ; or for example "+49"
internationalprefix=011  ; or for example "+"
;subscriberprefix=+4969 ; prefix including area code (some lines need this)
rxgain=1.0       ;linear receive gain, 1.0 = no change, use Diva rxdgain and 
rxagc for gain control
txgain=1.0       ;linear transmit gain, 1.0 = no change, use Diva txdgain and 
txagc for gain control
language=en      ;set default language
ulaw=yes        ;set this, if you live in u-law world instead of a-law

;jb.....         ;with Asterisk 1.4 you can configure jitterbuffer,
                  ;see Asterisk documentation for all jb* setting available.
;mohinterpret=default ;Asterisk 1.4: default music on hold class when placed on 
hold.


[ISDN1]
ntmode=no
isdnmode=msn
immediate=yes
incomingmsn=6902978,6516902978 ;Use Diva MSN settings
group=1
controller=1
softdtmf=off
relaxdtmf=off
faxdetect=off
faxdetecttime=0
accountcode=
context=isdn-in
holdtype=local
echocancelold=no
bridge=yes
devices=2
echocancel=no
echocancelnlp=0
allow=ulaw