[chan-capi-users] chan_capi problem with Gerdes Primux ISDN board

[Michael Kakuschky]

Hello Tamer,

yes maybe I have an idea. The capi header files from Gerdes differ in 
some points from the ones written by AVM which are the common capi 
header files on linux systems.

There are some parts inside which are not part of the capi 2.0 specs. If 
I rember right there is a difference in a parameter list order.

So, if you want to link against the Gerdes libcapi you have to use the 
Gerdes capi header files.

It's long time ago that i figure out that and maybe it's also the reason 
for your problems.

Regards Michael

Am 25.02.2010 15:26, schrieb Tamer Higazi:
> Hi people!
> I have a primux isdn 1 Port ISDN board and I do have figured out that I
> have always an echo during the conversation.
>
> Now, I figured out by building chan_capi, chan_capi uses it's own
> libcapi drivers, what might be the problem, instead of the drivers
> delivered from the card producer.
>
> I built chan_capi with the command:
>
> make USE_OWN_LIBCAPI=no
>
> with the hope to use the drivers which had been delivered together with
> the board. But asterisk won't start and tells me on the console:
>
> Segmentation Fault.
>
>
> Any ideas, what might be the problem?
>
>
>
> Tamer
> _______________________________________________
> Chan-capi-users mailing list
> Chan-capi-users at lists.melware.net
> http://lists.melware.net/mailman/listinfo/chan-capi-users
>
>