[chan-capi-users] chan_capi, Q.SIG: ISDN1#30: CAPI INFO 0x34e4: Invalid information element contents

[Rudolf E. Steiner]

Hi.

I try to send a call to a Q.SIG-Tenovis-System with 
"Dial(CAPI/ISDN1/${EXTEN})":

----- Output from Asterisk/chan_capi-debug -----
     -- Executing Dial("OSS/dsp", "CAPI/ISDN1/1234") in new stack
        > data = ISDN1/1234 format=8
        > parsed dialstring: 'ISDN1' 'NULL' '1234' ''
        > capi request for interface 'ISDN1'
   == ISDN1#30: setting format alaw - 0x8 (alaw)VOCODER
        > parsed dialstring: 'ISDN1' 'NULL' '1234' ''
        > capi: peerlink -1 allocated, peer is unlinked
        > chan_capi devicestate requested for ISDN1#30/1234 is 'Not in use'
   == ISDN1#30: Call CAPI/ISDN1#30/1234-0   (pres=0x00, ton=0x00)
        > chan_capi devicestate requested for ISDN1#30/1234 is 'In use'
CONNECT_REQ                ID=002 #0x0006 LEN=0055
   Controller/PLCI/NCCI            = 0x1
   CIPValue                        = 0x1
   CalledPartyNumber               = <80>1234
   CallingPartyNumber              = <00 80>
   CalledPartySubaddress           = default
   CallingPartySubaddress          = default
   BProtocol
    B1protocol                     = 0x1f
    B2protocol                     = 0x1
    B3protocol                     = 0x0
    B1configuration                = <08 04 03 00 a0 00>
    B2configuration                = default
    B3configuration                = default
    GlobalConfiguration            = default
   BC                              = default
   LLC                             = default
   HLC                             = default
   AdditionalInfo
    BChannelinformation            = <00 00>
    Keypadfacility                 = default
    Useruserdata                   = default
    Facilitydataarray              = default
    SendingComplete                = <01 00>

     -- Called ISDN1/1234
CAPI: ApplId=0x0002 Command=0x02 SubCommand=0x81 MsgNum=0x0006 
NCCI=0x00000a01
CONNECT_CONF               ID=002 #0x0006 LEN=0014
   Controller/PLCI/NCCI            = 0xa01
   Info                            = 0x0

     -- ISDN1#30: received CONNECT_CONF PLCI = 0xa01
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x0000 
NCCI=0x00000a01
INFO_IND                   ID=002 #0x0000 LEN=0017
   Controller/PLCI/NCCI            = 0xa01
   InfoNumber                      = 0x8
   InfoElement                     = <81 e4>

INFO_RESP                  ID=002 #0x0000 LEN=0012
   Controller/PLCI/NCCI            = 0xa01

     -- ISDN1#30: info element CAUSE 81 e4
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x0001 
NCCI=0x00000a01
INFO_IND                   ID=002 #0x0001 LEN=0015
   Controller/PLCI/NCCI            = 0xa01
   InfoNumber                      = 0x805a
   InfoElement                     = default

INFO_RESP                  ID=002 #0x0001 LEN=0012
   Controller/PLCI/NCCI            = 0xa01

     -- ISDN1#30: info element RELEASE COMPLETE
CAPI: ApplId=0x0002 Command=0x04 SubCommand=0x82 MsgNum=0x0003 
NCCI=0x00000a01
DISCONNECT_IND             ID=002 #0x0003 LEN=0014
   Controller/PLCI/NCCI            = 0xa01
   Reason                          = 0x34e4

DISCONNECT_RESP            ID=002 #0x0003 LEN=0012
   Controller/PLCI/NCCI            = 0xa01

        > ISDN1#30: CAPI INFO 0x34e4: Invalid information element contents
     -- chan_capi queue frame: [ TYPE: Control (4) SUBCLASS: Hangup (1) 
] [ISDN1#30]
   == ISDN1#30: CAPI Hangingup for PLCI=0xdead0000 in state 4
   == ISDN1#30: Interface cleanup PLCI=0xdead0000
   == Everyone is busy/congested at this time (1:0/0/1)
        > chan_capi devicestate requested for ISDN1#30/1234 is 'Not in use'
        > chan_capi devicestate requested for ISDN1#30/1234 is 'Not in use'
----- -----

I use a "Dialogic Diva V-PRI/E1-30 PCI v3".

Thank you for your help.

-- 
Rudolf E. Steiner
res-1 at communicate.at