[chan-capi-users] Call Deflection stopped working

[Christoph Lukas]

Hi,

I have used chan_capi's call deflection feature for more than a year
now. Yesterday I noticed that it has stopped working.

Asterisk shows the following warning:

Jan 16 09:16:08 NOTICE[7725]: chan_capi.c:4425 pbx_capi_call_deflect:
ISDN1#02: CALL DEFLECT for CAPI/ISDN1#02/******-7 not supported by
controller.

I am using chan_capi 1.0.1 with a Fritz PCI Card. The capi debug output
with verbosity 5 is attached at the end of the message.

Does anybody see why this happens? 

Thanks,
Christoph



CONNECT_IND ID=002 #0x0452 LEN=0047
  Controller/PLCI/NCCI            = 0x101
  CIPValue                        = 0x10
  CalledPartyNumber               = <c1>******
  CallingPartyNumber              = <21 83>172******
  CalledPartySubaddress           = default
  CallingPartySubaddress          = default
  BC                              = <80 90 a3>
  LLC                             = default
  HLC                             = <91 81>
  AdditionalInfo                  = default

    -- CONNECT_IND
(PLCI=0x101,DID=******,CID=172******,CIP=0x10,CONTROLLER=0x1)
       > ISDN1#02: msn='******' DNID='******' MSN
  == ISDN1#02: setting format alaw - 0x8 (alaw)
  == ISDN1#02: Incoming call '0172******' -> '******'
INFO_IND ID=002 #0x0453 LEN=0022
  Controller/PLCI/NCCI            = 0x101
  InfoNumber                      = 0x70
  InfoElement                     = <c1>******

INFO_RESP ID=002 #0x0453 LEN=0012
  Controller/PLCI/NCCI            = 0x101

    -- ISDN1#02: info element CALLED PARTY NUMBER
       > ISDN1#02: INFO_IND DID digits not used in this state.
INFO_IND ID=002 #0x0454 LEN=0016
  Controller/PLCI/NCCI            = 0x101
  InfoNumber                      = 0x18
  InfoElement                     = <89>

INFO_RESP ID=002 #0x0454 LEN=0012
  Controller/PLCI/NCCI            = 0x101

    -- ISDN1#02: info element CHANNEL IDENTIFICATION 89
INFO_IND ID=002 #0x0455 LEN=0016
  Controller/PLCI/NCCI            = 0x101
  InfoNumber                      = 0xa1
  InfoElement                     = <a1>

INFO_RESP ID=002 #0x0455 LEN=0012
  Controller/PLCI/NCCI            = 0x101

    -- ISDN1#02: info element Sending Complete
       > CAPI devicestate requested for ISDN1#02/******
[..]
Jan 16 09:16:07 WARNING[7725]: channel.c:1638 ast_waitfor_nandfds:
Thread -1249490000 Blocking 'CAPI/ISDN1#02/******-7', already blocked by
thread 0 in procedure (null)
    -- Executing capiCommand("CAPI/ISDN1#02/******-7", "deflect|
0100120172******") in new stack
    -- capiCommand: 'deflect' '0100120172******'
Jan 16 09:16:08 NOTICE[7725]: chan_capi.c:4425 pbx_capi_call_deflect:
ISDN1#02: CALL DEFLECT for CAPI/ISDN1#02/******-7 not supported by
controller.
[..]
  == ISDN1#02: CAPI Hangingup for PLCI=0x101 in state 8
    -- ISDN1#02: activehangingup (cause=0) for PLCI=0x101
CONNECT_RESP ID=002 #0x0452 LEN=0034
  Controller/PLCI/NCCI            = 0x101
  Reject                          = 0x2
  BProtocol                      
   B1protocol                     = 0x0
   B2protocol                     = 0x0
   B3protocol                     = 0x0
   B1configuration                = default
   B2configuration                = default
   B3configuration                = default
   GlobalConfiguration            = default
  ConnectedNumber                 = default
  ConnectedSubaddress             = default
  LLC                             = default
  AdditionalInfo                 
   BChannelinformation            = default
   Keypadfacility                 = default
   Useruserdata                   = default
   Facilitydataarray              = default
   SendingComplete                = default

       > CAPI devicestate requested for ISDN1#02/******
       > CAPI devicestate requested for ISDN1#02/******
DISCONNECT_IND ID=002 #0x0458 LEN=0014
  Controller/PLCI/NCCI            = 0x101
  Reason                          = 0x0

DISCONNECT_RESP ID=002 #0x0458 LEN=0012
  Controller/PLCI/NCCI            = 0x101

  == ISDN1#02: Interface cleanup PLCI=0x101
    -- parse_srv: SRV mapped to host sipgate.de, port 5060