[chan-capi-users] Primux ISDN PRI adapter - Analog call in

[Giancarlo Galvagno]

Armin,
thank you for your prompt reply
I believe this is not true:  as you can see from this log, obtained with the 
Primux Trace utility

---------------------------------------- cut here ---------------------------------------- 

                Info number               800F
                Info element              00
473.16.41.256 Len=12 Appl=2 Num=B3AD v INFO_RESP
                Controller/PLCI           00000101
473.16.41.256 Len=15 Appl=2 Num=B3AE ^ CONNECT_ACT_IND
                PLCI                      00000101
                Connected number          ''
                Connected subaddress      00
                LLC                       00
473.16.41.256 Len=12 Appl=2 Num=B3AE v CONNECT_ACT_RESP
                PLCI                      00000101
473.16.41.256 Constructing B2Trans F8DC1360
473.16.41.256 B-ENA(F8DB2790) Ctrl=1, Pin=20, Rmt=0173262697, Lcl=0183716
473.16.41.256 F8DC15A0: Constructing B3T Dispatch
473.16.41.257 Ctrl 01: dlsr1 = C0
473.16.41.257 B2 Transparent (F8DC1360) -> BChannel (F8DB2790) 
[0000,00000000,00000000]
473.16.41.257 BChannel (F8DB2790) -> B2 Transparent (F8DC1360) 
[0002,00000000,00000000]
473.16.41.257 B2 Transparent (F8DC1360) -> B3T Dispatch (F8DC15A0) 
[0002,00000000,00000000]
473.16.41.257 BCallRefTransparent::BCallRefTransparent F8DC1720/F8DC1760
473.16.41.257 Len=13 Appl=2 Num=B3AF ^ CONNECT_B3_IND
                NCCI                      00010101
                NCPI                      00
---------------------------------------- cut here ---------------------------------------- 

--->>>>>>           0173262697, Lcl=0183716

But from my analog phone I have dialed 0183716302, not only 0183716

As I told, if I call from my cellphone or from an ISDN line, everything works fine
Thanks


  ----- Original Message ----- 
  From: Giancarlo Galvagno 
  To: chan-capi-users at lists.melware.net 
  Sent: Tuesday, August 18, 2009 9:15 AM
  Subject: Primux ISDN PRI adapter - Analog call in


  I have a big problem with a Primux ISDN PRI adapter, Trixbox 1.4.
  The adapter works fine for dialing out.
  Also, it works fine for dialing in if I call from an ISDN line or a cellphone
  But when I dial from an analog phone, ( by example 0184716302 )Asterisk receives only 0184716, not the last three digits: in this case, from the Asterisk side the IVR catch the call and I cannot reach my extension 302
  I have several times contacted the manufacturer of the Primux Card ( Gerdes ) but they did not find any suggestion. 
  Has someone in the past had the same problem ?
  Thanks a lot

   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.melware.net/pipermail/chan-capi-users/attachments/20090818/eb0ffcad/attachment.htm