[chan-capi-users] Primux ISDN PRI adapter - Analog call in

[Giancarlo Galvagno]

Armin,
thank you for your prompt reply
I believe this is not true:  as you can see from this log, obtained with the 
Primux Trace utility

---------------------------------------- cut here



                Info number               800F
                Info element              00
473.16.41.256 Len=12 Appl=2 Num=B3AD v INFO_RESP
                Controller/PLCI           00000101
473.16.41.256 Len=15 Appl=2 Num=B3AE ^ CONNECT_ACT_IND
                PLCI                      00000101
                Connected number          ''
                Connected subaddress      00
                LLC                       00
473.16.41.256 Len=12 Appl=2 Num=B3AE v CONNECT_ACT_RESP
                PLCI                      00000101
473.16.41.256 Constructing B2Trans F8DC1360
473.16.41.256 B-ENA(F8DB2790) Ctrl=1, Pin=20, Rmt=0173262697, Lcl=0183716
473.16.41.256 F8DC15A0: Constructing B3T Dispatch
473.16.41.257 Ctrl 01: dlsr1 = C0
473.16.41.257 B2 Transparent (F8DC1360) -> BChannel (F8DB2790) 
[0000,00000000,00000000]
473.16.41.257 BChannel (F8DB2790) -> B2 Transparent (F8DC1360) 
[0002,00000000,00000000]
473.16.41.257 B2 Transparent (F8DC1360) -> B3T Dispatch (F8DC15A0) 
[0002,00000000,00000000]
473.16.41.257 BCallRefTransparent::BCallRefTransparent F8DC1720/F8DC1760
473.16.41.257 Len=13 Appl=2 Num=B3AF ^ CONNECT_B3_IND
                NCCI                      00010101
                NCPI                      00
----- Original Message ----- 
From: "Armin Schindler" <armin at melware.de>
To: "chan-capi users" <chan-capi-users at lists.melware.net>
Sent: Tuesday, August 18, 2009 9:36 AM
Subject: Re: [chan-capi-users] Primux ISDN PRI adapter - Analog call in


> Hi,
>
> On Tue, 18 Aug 2009, Giancarlo Galvagno wrote:
>> I have a big problem with a Primux ISDN PRI adapter, Trixbox 1.4.
>> The adapter works fine for dialing out.
>> Also, it works fine for dialing in if I call from an ISDN line or a 
>> cellphone
>> But when I dial from an analog phone, ( by example 0184716302 )Asterisk 
>> receives only 0184716, not the last three digits: in this case, from the 
>> Asterisk side the IVR catch the call and I cannot reach my extension 302
>> I have several times contacted the manufacturer of the Primux Card ( 
>> Gerdes ) but they did not find any suggestion.
>> Has someone in the past had the same problem ?
>
> that's not a problem of the card, but of the dialplan of Trixbox. The
> default dialplan seems to 'accept' any call from ISDN trunk. This means 
> that
> even if digits follow, there was already a match in the dialplan and other
> digits are ignored. So you need to change the dialplan of Trixbox from 
> e.g.
>  exten => _X.,1,...
> to
>  exten => _018471XXXX,1,...
>
> Armin
>
> _______________________________________________
> Chan-capi-users mailing list
> Chan-capi-users at lists.melware.net
> http://lists.melware.net/mailman/listinfo/chan-capi-users
>