[chan-capi-users] Hints for respond to incoming calls
Andreas Ruf
andreas_ruf at gmx.net
Mon Apr 6 10:37:57 CEST 2009
Hello List,
we have a problem with ISDN-Phones (not cell, not analog) calling into
our Asterisk/FreePBX-Server.
In the displays of them the called Number ("Vorwahl+Stammnummer
+Durchwahl") is shown like "Vorwahl+Stammnummer+Stammnummer+Durchwahl".
We are using:
ISDN (Germany): BRI Anlagenanschluss
ISDN-Card: Primux 4S0 II NT
Asterisk: 1.4.23.2
FreePBX: 2.5.1.2
chan_capi: 1.1.2
(Debian/Lenny: 2.6.26)
As chan_capi gives called number to Asterisk(FreePBX) like "Stammnummer
+Durchwahl", we have to route incoming calls to a Durchwahl in
Asterisk(FreePBX) with a setting of "Stammnummer+Durchwahl". So we
suspect our problem described above is related to the values of
ConnectedNumber and ConnectedSubaddress not properly set by FreePBX
(ConnectedSubadress should be only "Durchwahl"?).
Could this be right?
Can anyone please give us a hint where to dig in the relationship of
asterisk and chan_capi for this to solve?
Is there, beside the variable CONNECTEDNUMBER, another variable for
setting ConnectedSubaddress?
If setting for example the variable CONNECTEDNUMBER (for incoming calls)
in Asterisk, does chan_capi independently evaluate it or has it to be
set with the dialstring?
Many thanks in advance
Sincerely
Andreas Ruf
>From your experience, are these settings appropriate?
capi.conf:
[general]
nationalprefix=0
internationalprefix=049
;subscriberprefix=+4969
;defaultcid=Stammnummer+0
rxgain=-0.5 ;reinkommende Lautstaerke
txgain=0.47 ;rausgehende Lautstaerke
language=de ;set default language
; Anlagenanschluss
;;;;;;;;;;;;;;;;;
[isdn_port1]
isdnmode=did
incomingmsn=*
controller=1
group=1
faxdetect=off
accountcode=isdn_port1
context=isdn_in_port1
softdtmf=off
immediate=no
overlapdial=yes
devices=2
[isdn_port2]
isdnmode=did
incomingmsn=*
controller=2
group=1
faxdetect=off
accountcode=isdn_port2
context=isdn_in_port2
softdtmf=off
immediate=no
overlapdial=yes
devices=2
...
If the following log is too short, we can send the full log.
Stammnummer: 12345
Durchwahl: 36
log (shortened) (incoming call):
[Apr 2 18:18:48] VERBOSE[6583] logger.c: CAPI: ApplId=0x0002
Command=0x02 SubCommand=0x82 MsgNum=0x8382 NCCI=0x00000101
[Apr 2 18:18:48] VERBOSE[6583] logger.c: CONNECT_IND ID=002 #0x8382
LEN=0057
Controller/PLCI/NCCI = 0x101
CIPValue = 0x10
CalledPartyNumber = <c1>1234536
CallingPartyNumber = <21 81>691899037
CalledPartySubaddress = default
CallingPartySubaddress = default
BC = <80 90 a3>
LLC = default
HLC = <91 81>
AdditionalInfo
BChannelinformation = <00 00>
Keypadfacility = default
Useruserdata = default
Facilitydataarray = default
[Apr 2 18:18:48] VERBOSE[6583] logger.c: -- CONNECT_IND
(PLCI=0x101,DID=1234536,CID=691899037,CIP=0x10,CONTROLLER=0x1)
[Apr 2 18:18:48] VERBOSE[6583] logger.c: > isdn_port1#02:
msn='*' DNID='1234536' DID
[Apr 2 18:18:48] VERBOSE[6583] logger.c: == isdn_port1#02: setting
format alaw - 0x8 (alaw)
[Apr 2 18:18:48] VERBOSE[6583] logger.c: == isdn_port1#02: Incoming
call '0691899037' -> '1234536'
[Apr 2 18:18:48] VERBOSE[6583] logger.c: CAPI: ApplId=0x0002
Command=0x08 SubCommand=0x82 MsgNum=0x8383 NCCI=0x00000101
[Apr 2 18:18:48] VERBOSE[6583] logger.c: INFO_IND ID=002 #0x8383
LEN=0016
Controller/PLCI/NCCI = 0x101
InfoNumber = 0xb
InfoElement = <d2>
[Apr 2 18:18:48] VERBOSE[6583] logger.c: INFO_RESP ID=002 #0x8383
LEN=0012
Controller/PLCI/NCCI = 0x101
[Apr 2 18:18:48] VERBOSE[6583] logger.c: -- isdn_port1#02:
unhandled INFO_IND 0xb (PLCI=0x101)
[Apr 2 18:18:48] VERBOSE[6583] logger.c: CAPI: ApplId=0x0002
Command=0x08 SubCommand=0x82 MsgNum=0x8384 NCCI=0x00000101
[Apr 2 18:18:48] VERBOSE[6583] logger.c: INFO_IND ID=002 #0x8384
LEN=0016
Controller/PLCI/NCCI = 0x101
InfoNumber = 0x18
InfoElement = <89>
[Apr 2 18:18:48] VERBOSE[6583] logger.c: INFO_RESP ID=002 #0x8384
LEN=0012
Controller/PLCI/NCCI = 0x101
[Apr 2 18:18:48] VERBOSE[6583] logger.c: -- isdn_port1#02: info
element CHANNEL IDENTIFICATION 89
[Apr 2 18:18:48] VERBOSE[6583] logger.c: CAPI: ApplId=0x0002
Command=0x08 SubCommand=0x82 MsgNum=0x8385 NCCI=0x00000101
[Apr 2 18:18:48] VERBOSE[6583] logger.c: INFO_IND ID=002 #0x8385
LEN=0027
Controller/PLCI/NCCI = 0x101
InfoNumber = 0x6c
InfoElement = <21 81>691899037
[Apr 2 18:18:48] VERBOSE[6583] logger.c: INFO_RESP ID=002 #0x8385
LEN=0012
Controller/PLCI/NCCI = 0x101
[Apr 2 18:18:48] VERBOSE[6583] logger.c: -- isdn_port1#02:
unhandled INFO_IND 0x6c (PLCI=0x101)
[Apr 2 18:18:48] VERBOSE[6583] logger.c: CAPI: ApplId=0x0002
Command=0x08 SubCommand=0x82 MsgNum=0x8386 NCCI=0x00000101
[Apr 2 18:18:48] VERBOSE[6583] logger.c: INFO_IND ID=002 #0x8386
LEN=0023
Controller/PLCI/NCCI = 0x101
InfoNumber = 0x70
InfoElement = <c1>1234536
[Apr 2 18:18:48] VERBOSE[6583] logger.c: INFO_RESP ID=002 #0x8386
LEN=0012
Controller/PLCI/NCCI = 0x101
[Apr 2 18:18:48] VERBOSE[6583] logger.c: -- isdn_port1#02: info
element CALLED PARTY NUMBER
[Apr 2 18:18:48] VERBOSE[6583] logger.c: -- isdn_port1#02: Updated
channel name: CAPI/isdn_port1#02/1234536-5
[Apr 2 18:18:48] VERBOSE[6583] logger.c: -- isdn_port1#02:
CAPI/isdn_port1#02/1234536-5: 1234536 matches in context isdn_in_port1
[Apr 2 18:18:48] VERBOSE[9287] logger.c: -- Executing
[1234536 at isdn_in_port1:1] Set("CAPI/isdn_port1#02/1234536-5",
"__FROM_DID=1234536") in new stack
[Apr 2 18:18:48] VERBOSE[9287] logger.c: -- Executing
[1234536 at isdn_in_port1:2] Gosub("CAPI/isdn_port1#02/1234536-5",
"app-blacklist-check|s|1") in new stack
[Apr 2 18:18:48] VERBOSE[9287] logger.c: -- Executing
[s at app-blacklist-check:1]
LookupBlacklist("CAPI/isdn_port1#02/1234536-5", "") in new stack
[Apr 2 18:18:48] WARNING[9287] app_lookupblacklist.c: LookupBlacklist
is deprecated. Please use ${BLACKLIST()} instead.
[Apr 2 18:18:48] VERBOSE[9287] logger.c: -- Executing
[s at app-blacklist-check:2] GotoIf("CAPI/isdn_port1#02/1234536-5",
"0?blacklisted") in new stack
[Apr 2 18:18:48] VERBOSE[9287] logger.c: -- Executing
[s at app-blacklist-check:3] Return("CAPI/isdn_port1#02/1234536-5", "") in
new stack
[Apr 2 18:18:48] VERBOSE[9287] logger.c: -- Executing
[1234536 at isdn_in_port1:3] ExecIf("CAPI/isdn_port1#02/1234536-5", "1 |
Set|CALLERID(name)=0691899037") in new stack
[Apr 2 18:18:48] VERBOSE[6566] logger.c: > chan_capi devicestate
requested for isdn_port1#02/1234536 is 'Ringing'
[Apr 2 18:18:48] VERBOSE[9287] logger.c: -- Executing
[1234536 at isdn_in_port1:4] Set("CAPI/isdn_port1#02/1234536-5",
"FAX_RX=236") in new stack
[Apr 2 18:18:48] VERBOSE[9287] logger.c: -- Executing
[1234536 at isdn_in_port1:5] Answer("CAPI/isdn_port1#02/1234536-5", "") in
new stack
[Apr 2 18:18:48] VERBOSE[9287] logger.c: == isdn_port1#02: Answering
for 1234536
[Apr 2 18:18:48] VERBOSE[9287] logger.c: CONNECT_RESP ID=002 #0x8382
LEN=0043
Controller/PLCI/NCCI = 0x101
Reject = 0x0
BProtocol
B1protocol = 0x1
B2protocol = 0x1
B3protocol = 0x0
B1configuration = default
B2configuration = default
B3configuration = default
ConnectedNumber = default
ConnectedSubaddress = <01 80>1234536
LLC = default
AdditionalInfo = default
[Apr 2 18:18:48] VERBOSE[9287] logger.c: -- Executing
[1234536 at isdn_in_port1:6] PlayTones("CAPI/isdn_port1#02/1234536-5",
"ring") in new stack
[Apr 2 18:18:48] VERBOSE[9287] logger.c: -- Executing
[1234536 at isdn_in_port1:7] NVFaxDetect("CAPI/isdn_port1#02/1234536-5",
"4|t") in new stack
[Apr 2 18:18:48] DEBUG[9287] app_nv_faxdetect-1.0.6_1-foras1.4.23.1.c:
Preparing detect of fax (waitdur=4ms, sildur=1000ms, mindur=100ms,
maxdur=-1ms)
[Apr 2 18:18:48] VERBOSE[6566] logger.c: > chan_capi devicestate
requested for isdn_port1#02/1234536 is 'In use'
[Apr 2 18:18:48] VERBOSE[6583] logger.c: == Started pbx on channel
CAPI/isdn_port1#02/1234536-5
[Apr 2 18:18:48] VERBOSE[6583] logger.c: CAPI: ApplId=0x0002
Command=0x08 SubCommand=0x82 MsgNum=0x8387 NCCI=0x00000101
[Apr 2 18:18:48] VERBOSE[6583] logger.c: INFO_IND ID=002 #0x8387
LEN=0015
Controller/PLCI/NCCI = 0x101
InfoNumber = 0x8005
InfoElement = default
[Apr 2 18:18:48] VERBOSE[6583] logger.c: INFO_RESP ID=002 #0x8387
LEN=0012
Controller/PLCI/NCCI = 0x101
[Apr 2 18:18:48] VERBOSE[6583] logger.c: -- isdn_port1#02: info
element SETUP
[Apr 2 18:18:48] VERBOSE[6583] logger.c: == isdn_port1#02: pbx
already started on channel CAPI/isdn_port1#02/1234536-5
[Apr 2 18:18:48] VERBOSE[6583] logger.c: CAPI: ApplId=0x0002
Command=0x08 SubCommand=0x82 MsgNum=0x8388 NCCI=0x00000101
[Apr 2 18:18:48] VERBOSE[6583] logger.c: INFO_IND ID=002 #0x8388
LEN=0016
Controller/PLCI/NCCI = 0x101
InfoNumber = 0x4004
InfoElement = <00>
[Apr 2 18:18:48] VERBOSE[6583] logger.c: INFO_RESP ID=002 #0x8388
LEN=0012
Controller/PLCI/NCCI = 0x101
[Apr 2 18:18:48] VERBOSE[6583] logger.c: -- isdn_port1#02:
unhandled INFO_IND 0x4004 (PLCI=0x101)
[Apr 2 18:18:48] VERBOSE[6583] logger.c: CAPI: ApplId=0x0002
Command=0x08 SubCommand=0x82 MsgNum=0x8389 NCCI=0x00000101
[Apr 2 18:18:48] VERBOSE[6583] logger.c: INFO_IND ID=002 #0x8389
LEN=0015
Controller/PLCI/NCCI = 0x101
InfoNumber = 0x800f
InfoElement = default
[Apr 2 18:18:48] VERBOSE[6583] logger.c: INFO_RESP ID=002 #0x8389
LEN=0012
Controller/PLCI/NCCI = 0x101
[Apr 2 18:18:48] VERBOSE[6583] logger.c: -- isdn_port1#02: info
element CONNECT ACK
[Apr 2 18:18:48] VERBOSE[6583] logger.c: CAPI: ApplId=0x0002
Command=0x03 SubCommand=0x82 MsgNum=0x838a NCCI=0x00000101
[Apr 2 18:18:48] VERBOSE[6583] logger.c: CONNECT_ACTIVE_IND ID=002
#0x838a LEN=0015
Controller/PLCI/NCCI = 0x101
ConnectedNumber = default
ConnectedSubaddress = default
LLC = default
[Apr 2 18:18:48] VERBOSE[6583] logger.c: CONNECT_ACTIVE_RESP ID=002
#0x838a LEN=0012
Controller/PLCI/NCCI = 0x101
[Apr 2 18:18:48] VERBOSE[6583] logger.c: CAPI: ApplId=0x0002
Command=0x82 SubCommand=0x82 MsgNum=0x838b NCCI=0x00010101
[Apr 2 18:18:48] VERBOSE[6583] logger.c: CONNECT_B3_IND ID=002 #0x838b
LEN=0013
Controller/PLCI/NCCI = 0x10101
NCPI = default
[Apr 2 18:18:48] VERBOSE[6583] logger.c: CONNECT_B3_RESP ID=002 #0x838b
LEN=0015
Controller/PLCI/NCCI = 0x10101
Reject = 0x0
NCPI = default
[Apr 2 18:18:48] VERBOSE[6583] logger.c: CAPI: ApplId=0x0002
Command=0x83 SubCommand=0x82 MsgNum=0x838c NCCI=0x00010101
[Apr 2 18:18:48] VERBOSE[6583] logger.c: CONNECT_B3_ACTIVE_IND ID=002
#0x838c LEN=0013
Controller/PLCI/NCCI = 0x10101
NCPI = default
[Apr 2 18:18:48] VERBOSE[6583] logger.c: CONNECT_B3_ACTIVE_RESP ID=002
#0x838c LEN=0012
Controller/PLCI/NCCI = 0x10101
[Apr 2 18:18:48] VERBOSE[6583] logger.c: == isdn_port1#02: Setting up
DTMF detector (PLCI=0x101, flag=1)
[Apr 2 18:18:48] VERBOSE[6583] logger.c: FACILITY_REQ ID=002 #0x02bf
LEN=0023
Controller/PLCI/NCCI = 0x101
FacilitySelector = 0x1
FacilityRequestParameter = <01 00>P<00>P<00 00 00>
[Apr 2 18:18:48] VERBOSE[6583] logger.c: CAPI: ApplId=0x0002
Command=0x80 SubCommand=0x81 MsgNum=0x02bf NCCI=0x00000101
[Apr 2 18:18:48] VERBOSE[6583] logger.c: FACILITY_CONF ID=002 #0x02bf
LEN=0019
Controller/PLCI/NCCI = 0x101
Info = 0x0
FacilitySelector = 0x1
FacilityConfirmationParameter = <00 00>
[Apr 2 18:18:48] VERBOSE[6583] logger.c: > isdn_port1#02: DTMF
conf(PLCI=0x101)
[Apr 2 18:18:48] VERBOSE[9287] logger.c: DATA_B3_REQ ID=002 #0x02c0
LEN=0022
Controller/PLCI/NCCI = 0x10101
Data32 = 0x888b484
DataLength = 0xa0
DataHandle = 0x13f
Flags = 0x0
Data64 = 0x0
[Apr 2 18:18:48] VERBOSE[6583] logger.c: CAPI: ApplId=0x0002
Command=0x86 SubCommand=0x82 MsgNum=0x838d NCCI=0x00010101
[Apr 2 18:18:48] VERBOSE[6583] logger.c: DATA_B3_IND ID=002 #0x838d
LEN=0022
Controller/PLCI/NCCI = 0x10101
Data32 = 0x88d5438
DataLength = 0xa0
DataHandle = 0x0
Flags = 0x0
Data64 = 0xffffffffffffffff
[Apr 2 18:18:48] VERBOSE[6583] logger.c: DATA_B3_RESP ID=002 #0x838d
LEN=0014
Controller/PLCI/NCCI = 0x10101
DataHandle = 0x0
[Apr 2 18:18:48] VERBOSE[6583] logger.c: -- isdn_port1#02:
DATA_B3_IND (len=160) fr.datalen=160 fr.subclass=8
[Apr 2 18:18:48] VERBOSE[9287] logger.c: DATA_B3_REQ ID=002 #0x02c1
LEN=0022
Controller/PLCI/NCCI = 0x10101
Data32 = 0x888b564
DataLength = 0xa0
DataHandle = 0x140
Flags = 0x0
Data64 = 0x0
[Apr 2 18:18:48] VERBOSE[6583] logger.c: CAPI: ApplId=0x0002
Command=0x86 SubCommand=0x81 MsgNum=0x02c0 NCCI=0x00010101
[Apr 2 18:18:48] VERBOSE[6583] logger.c: DATA_B3_CONF ID=002 #0x02c0
LEN=0016
Controller/PLCI/NCCI = 0x10101
DataHandle = 0x13f
Info = 0x0
[Apr 2 18:18:48] VERBOSE[6583] logger.c: CAPI: ApplId=0x0002
Command=0x86 SubCommand=0x82 MsgNum=0x838e NCCI=0x00010101
[Apr 2 18:18:48] VERBOSE[6583] logger.c: DATA_B3_IND ID=002 #0x838e
LEN=0022
Controller/PLCI/NCCI = 0x10101
Data32 = 0x88d5438
DataLength = 0xa0
DataHandle = 0x0
Flags = 0x0
Data64 = 0xffffffffffffffff
[Apr 2 18:18:48] VERBOSE[6583] logger.c: DATA_B3_RESP ID=002 #0x838e
LEN=0014
Controller/PLCI/NCCI = 0x10101
DataHandle = 0x0
[Apr 2 18:18:48] VERBOSE[6583] logger.c: -- isdn_port1#02:
DATA_B3_IND (len=160) fr.datalen=160 fr.subclass=8
[Apr 2 18:18:48] VERBOSE[9287] logger.c: DATA_B3_REQ ID=002 #0x02c2
LEN=0022
Controller/PLCI/NCCI = 0x10101
Data32 = 0x888b644
DataLength = 0xa0
DataHandle = 0x141
Flags = 0x0
Data64 = 0x0
[Apr 2 18:18:48] VERBOSE[6583] logger.c: CAPI: ApplId=0x0002
Command=0x86 SubCommand=0x81 MsgNum=0x02c1 NCCI=0x00010101
[Apr 2 18:18:48] VERBOSE[6583] logger.c: DATA_B3_CONF ID=002 #0x02c1
LEN=0016
Controller/PLCI/NCCI = 0x10101
DataHandle = 0x140
Info = 0x0
[Apr 2 18:18:48] VERBOSE[6583] logger.c: CAPI: ApplId=0x0002
Command=0x86 SubCommand=0x82 MsgNum=0x838f NCCI=0x00010101
[Apr 2 18:18:48] VERBOSE[6583] logger.c: DATA_B3_IND ID=002 #0x838f
LEN=0022
Controller/PLCI/NCCI = 0x10101
Data32 = 0x88d5438
DataLength = 0xa0
DataHandle = 0x0
Flags = 0x0
Data64 = 0xffffffffffffffff
[Apr 2 18:18:48] VERBOSE[6583] logger.c: DATA_B3_RESP ID=002 #0x838f
LEN=0014
Controller/PLCI/NCCI = 0x10101
DataHandle = 0x0
[Apr 2 18:18:48] VERBOSE[6583] logger.c: -- isdn_port1#02:
DATA_B3_IND (len=160) fr.datalen=160 fr.subclass=8
[Apr 2 18:18:48] VERBOSE[9287] logger.c: DATA_B3_REQ ID=002 #0x02c3
LEN=0022
Controller/PLCI/NCCI = 0x10101
Data32 = 0x888b724
DataLength = 0xa0
DataHandle = 0x142
Flags = 0x0
Data64 = 0x0
[Apr 2 18:18:48] VERBOSE[6583] logger.c: CAPI: ApplId=0x0002
Command=0x86 SubCommand=0x81 MsgNum=0x02c2 NCCI=0x00010101
[Apr 2 18:18:48] VERBOSE[6583] logger.c: DATA_B3_CONF ID=002 #0x02c2
LEN=0016
Controller/PLCI/NCCI = 0x10101
DataHandle = 0x141
Info = 0x0
[Apr 2 18:18:48] VERBOSE[6583] logger.c: CAPI: ApplId=0x0002
Command=0x86 SubCommand=0x82 MsgNum=0x8390 NCCI=0x00010101
[Apr 2 18:18:48] VERBOSE[6583] logger.c: DATA_B3_IND ID=002 #0x8390
LEN=0022
Controller/PLCI/NCCI = 0x10101
Data32 = 0x88d5438
DataLength = 0xa0
DataHandle = 0x0
Flags = 0x0
Data64 = 0xffffffffffffffff
[Apr 2 18:18:48] VERBOSE[6583] logger.c: DATA_B3_RESP ID=002 #0x8390
LEN=0014
Controller/PLCI/NCCI = 0x10101
DataHandle = 0x0
[Apr 2 18:18:48] VERBOSE[6583] logger.c: -- isdn_port1#02:
DATA_B3_IND (len=160) fr.datalen=160 fr.subclass=8
[Apr 2 18:18:48] VERBOSE[9287] logger.c: DATA_B3_REQ ID=002 #0x02c4
LEN=0022
Controller/PLCI/NCCI = 0x10101
Data32 = 0x888b1e4
DataLength = 0xa0
DataHandle = 0x143
Flags = 0x0
Data64 = 0x0
[Apr 2 18:18:48] VERBOSE[6583] logger.c: CAPI: ApplId=0x0002
Command=0x86 SubCommand=0x81 MsgNum=0x02c3 NCCI=0x00010101
[Apr 2 18:18:48] VERBOSE[6583] logger.c: DATA_B3_CONF ID=002 #0x02c3
LEN=0016
Controller/PLCI/NCCI = 0x10101
DataHandle = 0x142
Info = 0x0
[Apr 2 18:18:48] VERBOSE[6583] logger.c: CAPI: ApplId=0x0002
Command=0x86 SubCommand=0x82 MsgNum=0x8391 NCCI=0x00010101
[Apr 2 18:18:48] VERBOSE[6583] logger.c: DATA_B3_IND ID=002 #0x8391
LEN=0022
Controller/PLCI/NCCI = 0x10101
Data32 = 0x88d5438
DataLength = 0xa0
DataHandle = 0x0
Flags = 0x0
Data64 = 0xffffffffffffffff
[Apr 2 18:18:48] VERBOSE[6583] logger.c: DATA_B3_RESP ID=002 #0x8391
LEN=0014
Controller/PLCI/NCCI = 0x10101
DataHandle = 0x0
[Apr 2 18:18:48] VERBOSE[6583] logger.c: -- isdn_port1#02:
DATA_B3_IND (len=160) fr.datalen=160 fr.subclass=8
[Apr 2 18:18:48] VERBOSE[9287] logger.c: DATA_B3_REQ ID=002 #0x02c5
LEN=0022
Controller/PLCI/NCCI = 0x10101
Data32 = 0x888b2c4
DataLength = 0xa0
DataHandle = 0x144
Flags = 0x0
Data64 = 0x0
[Apr 2 18:18:48] VERBOSE[6583] logger.c: CAPI: ApplId=0x0002
Command=0x86 SubCommand=0x81 MsgNum=0x02c4 NCCI=0x00010101
[Apr 2 18:18:48] VERBOSE[6583] logger.c: DATA_B3_CONF ID=002 #0x02c4
LEN=0016
Controller/PLCI/NCCI = 0x10101
DataHandle = 0x143
Info = 0x0
[Apr 2 18:18:48] VERBOSE[6583] logger.c: CAPI: ApplId=0x0002
Command=0x86 SubCommand=0x82 MsgNum=0x8392 NCCI=0x00010101
[Apr 2 18:18:48] VERBOSE[6583] logger.c: DATA_B3_IND ID=002 #0x8392
LEN=0022
Controller/PLCI/NCCI = 0x10101
Data32 = 0x88d5438
DataLength = 0xa0
DataHandle = 0x0
Flags = 0x0
Data64 = 0xffffffffffffffff
[Apr 2 18:18:48] VERBOSE[6583] logger.c: DATA_B3_RESP ID=002 #0x8392
LEN=0014
Controller/PLCI/NCCI = 0x10101
DataHandle = 0x0
[Apr 2 18:18:48] VERBOSE[6583] logger.c: -- isdn_port1#02:
DATA_B3_IND (len=160) fr.datalen=160 fr.subclass=8
[Apr 2 18:18:48] VERBOSE[9287] logger.c: DATA_B3_REQ ID=002 #0x02c6
LEN=0022
Controller/PLCI/NCCI = 0x10101
Data32 = 0x888b3a4
DataLength = 0xa0
DataHandle = 0x145
Flags = 0x0
Data64 = 0x0
...
More information about the Chan-capi-users
mailing list