[chan-capi-users] CAPI Problem - Call rejected
Hauke Müller
hauke at mueller-martens.de
Tue May 6 09:01:39 CEST 2008
Hi Mario
yes all numbers are busy. I will open a trouble ticket now at the line
provider. Perhaps it is a line problem... a strange one.
hauke
Am 05.05.2008 um 21:45 schrieb Mario Goegel:
> Hi Hauke,
>
> the switch reports to your C4, peer is busy, so there's no problem on
> your isdn card - have you tried other numbers? The german gsm
> providers
> had some problems in the last time. Tried to call yourself over the
> card?
>
> Mario
>
>
> Hauke Müller schrieb:
>> Hello Armin et all,
>>
>> today our Trixbox system (fresh setup, 1 week old) stopped to dial
>> out
>> (call rejected). Inbound calls are working though.
>> I'm not sure whether it's the line, capi or the card. But as inbound
>> calling is working, I assume it's not the line and probably not the
>> card.
>>
>> Any help is appreciated.
>>
>>
>> I tried the line with capifax:
>> Disconnected.
>> Reason : 3495 Call rejected
>> Reason-B3 : 0000 No additional information
>>
>> It's an AVM C4 card, here's the capiinfo for the first controller:
>>
>> Number of Controllers : 4
>> Controller 1:
>> Manufacturer: AVM GmbH
>> CAPI Version: 2.0
>> Manufacturer Version: 3.11-06 (49.22)
>> Serial Number: 0900841
>> BChannels: 2
>> Global Options: 0x00000039
>> internal controller supported
>> DTMF supported
>> Supplementary Services supported
>> channel allocation supported (leased lines)
>> B1 protocols support: 0x4000011f
>> 64 kbit/s with HDLC framing
>> 64 kbit/s bit-transparent operation
>> V.110 asynconous operation with start/stop byte framing
>> V.110 synconous operation with HDLC framing
>> T.30 modem for fax group 3
>> Modem asyncronous operation with start/stop byte framing
>> B2 protocols support: 0x00000b1b
>> ISO 7776 (X.75 SLP)
>> Transparent
>> LAPD with Q.921 for D channel X.25 (SAPI 16)
>> T.30 for fax group 3
>> ISO 7776 (X.75 SLP) with V.42bis compression
>> V.120 asyncronous mode
>> V.120 bit-transparent mode
>> B3 protocols support: 0x800000bf
>> Transparent
>> T.90NL, T.70NL, T.90
>> ISO 8208 (X.25 DTE-DTE)
>> X.25 DCE
>> T.30 for fax group 3
>> T.30 for fax group 3 with extensions
>> Modem
>>
>> 0100
>> 0200
>> 39000000
>> 1f010040
>> 1b0b0000
>> bf000080
>> 00000000 00000000 00000000 00000000 00000000 00000000
>> 01000001 00010000 00000000 00000000 00000000
>>
>> Supplementary services support: 0x000003ff
>> Hold / Retrieve
>> Terminal Portability
>> ECT
>> 3PTY
>> Call Forwarding
>> Call Deflection
>> MCID
>> CCBS
>>
>>
>> This is a call with Asterisk and capi debug turned on:
>>
>> -- Executing [s at macro-dial:7] Dial("CAPI/ISDN3#02/18911742-c",
>> "CAPI/g1/01794666830|15|tr") in new stack
>>> data = g1/01794666830 format=8
>>> parsed dialstring: 'g1' 'NULL' '01794666830' ''
>>> capi request group = 2
>> == ISDN4#02: setting format alaw - 0x8 (alaw)
>>> parsed dialstring: 'g1' 'NULL' '01794666830' ''
>>> capi: peerlink -1 allocated, peer is unlinked
>> == ISDN4#02: Call CAPI/ISDN4#02/01794666830-d (pres=0x03,
>> ton=0x21)
>> CONNECT_REQ ID=002 #0x03fc LEN=0067
>> Controller/PLCI/NCCI = 0x4
>> CIPValue = 0x4
>> CalledPartyNumber = <80>01794666830
>> CallingPartyNumber = <21 83>08995928628
>> CalledPartySubaddress = default
>> CallingPartySubaddress = default
>> BProtocol
>> B1protocol = 0x1
>> B2protocol = 0x1
>> B3protocol = 0x0
>> B1configuration = default
>> B2configuration = default
>> B3configuration = default
>> GlobalConfiguration = default
>> BC = default
>> LLC = default
>> HLC = default
>> AdditionalInfo
>> BChannelinformation = <00 00>
>> Keypadfacility = default
>> Useruserdata = default
>> Facilitydataarray = default
>> SendingComplete = <01 00>
>>
>> -- Called g1/01794666830
>> == ISDN3#02: Requested RINGING-Indication for CAPI/
>> ISDN3#02/18911742-c
>> ALERT_REQ ID=002 #0x03fd LEN=0018
>> Controller/PLCI/NCCI = 0x103
>> AdditionalInfo
>> BChannelinformation = default
>> Keypadfacility = default
>> Useruserdata = default
>> Facilitydataarray = default
>> SendingComplete = default
>>
>> CAPI: ApplId=0x0002 Command=0x02 SubCommand=0x81 MsgNum=0x03fc
>> NCCI=0x00000204
>> CONNECT_CONF ID=002 #0x03fc LEN=0014
>> Controller/PLCI/NCCI = 0x204
>> Info = 0x0
>>
>> -- ISDN4#02: received CONNECT_CONF PLCI = 0x204
>> CAPI: ApplId=0x0002 Command=0x01 SubCommand=0x81 MsgNum=0x03fd
>> NCCI=0x00000103
>> ALERT_CONF ID=002 #0x03fd LEN=0014
>> Controller/PLCI/NCCI = 0x103
>> Info = 0x0
>>
>>> chan_capi devicestate requested for ISDN4#02/01794666830-d
>> is 'In use'
>>> chan_capi devicestate requested for ISDN4#02/01794666830 is
>> 'In use'
>> CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0xca99
>> NCCI=0x00000204
>> INFO_IND ID=002 #0xca99 LEN=0015
>> Controller/PLCI/NCCI = 0x204
>> InfoNumber = 0x8002
>> InfoElement = default
>>
>> INFO_RESP ID=002 #0xca99 LEN=0012
>> Controller/PLCI/NCCI = 0x204
>>
>> -- ISDN4#02: info element CALL PROCEEDING
>> -- chan_capi queue frame: [ TYPE: Control (4) SUBCLASS: Unknown
>> control '15' (15) ] [ISDN4#02]
>> CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0xca9a
>> NCCI=0x00000204
>> INFO_IND ID=002 #0xca9a LEN=0016
>> Controller/PLCI/NCCI = 0x204
>> InfoNumber = 0x18
>> InfoElement = <89>
>>
>> INFO_RESP ID=002 #0xca9a LEN=0012
>> Controller/PLCI/NCCI = 0x204
>>
>> -- ISDN4#02: info element CHANNEL IDENTIFICATION 89
>> -- CAPI/ISDN4#02/01794666830-d is proceeding passing it to CAPI/
>> ISDN3#02/18911742-c
>> CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0xca9b
>> NCCI=0x00000204
>> INFO_IND ID=002 #0xca9b LEN=0015
>> Controller/PLCI/NCCI = 0x204
>> InfoNumber = 0x8045
>> InfoElement = default
>>
>> INFO_RESP ID=002 #0xca9b LEN=0012
>> Controller/PLCI/NCCI = 0x204
>>
>> -- ISDN4#02: info element DISCONNECT
>> -- ISDN4#02: Disconnect case 1
>> -- chan_capi queue frame: [ TYPE: Control (4) SUBCLASS: Busy
>> (5) ] [ISDN4#02]
>> CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0xca9c
>> NCCI=0x00000204
>> INFO_IND ID=002 #0xca9c LEN=0017
>> Controller/PLCI/NCCI = 0x204
>> InfoNumber = 0x1e
>> InfoElement = <82 88>
>>
>> INFO_RESP ID=002 #0xca9c LEN=0012
>> Controller/PLCI/NCCI = 0x204
>>
>> -- ISDN4#02: info element PI 82 88
>>> ISDN4#02: In-band information available
>> -- CAPI/ISDN4#02/01794666830-d is busy
>> -- chan_capi queue frame: [ TYPE: Control (4) SUBCLASS: Unknown
>> control '14' (14) ] [ISDN4#02]
>> CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0xca9d
>> NCCI=0x00000204
>> INFO_IND ID=002 #0xca9d LEN=0017
>> Controller/PLCI/NCCI = 0x204
>> InfoNumber = 0x8
>> InfoElement = <82 95>
>>
>> INFO_RESP ID=002 #0xca9d LEN=0012
>> Controller/PLCI/NCCI = 0x204
>>
>> -- ISDN4#02: info element CAUSE 82 95
>> CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0xca9e
>> NCCI=0x00000204
>> INFO_IND ID=002 #0xca9e LEN=0030
>> Controller/PLCI/NCCI = 0x204
>> InfoNumber = 0x1c
>> InfoElement = <91 a1 0c 02 02 a0>E<06 06 04 00
>> 87>i<01 07>
>>
>> INFO_RESP ID=002 #0xca9e LEN=0012
>> Controller/PLCI/NCCI = 0x204
>>
>> -- ISDN4#02: info element FACILITY
>> == ISDN4#02: CAPI Hangingup for PLCI=0x204 in state 5
>> -- ISDN4#02: activehangingup (cause=21) for PLCI=0x204
>> DISCONNECT_REQ ID=002 #0x03fe LEN=0013
>> Controller/PLCI/NCCI = 0x204
>> AdditionalInfo = default
>>
>> ISDN4#02: wait for DISCONNECT_CONF (0x481)
>> CAPI: ApplId=0x0002 Command=0x04 SubCommand=0x81 MsgNum=0x03fe
>> NCCI=0x00000204
>> DISCONNECT_CONF ID=002 #0x03fe LEN=0014
>> Controller/PLCI/NCCI = 0x204
>> Info = 0x0
>>
>> ISDN4#02: found and signal for DISCONNECT_CONF
>> ISDN4#02: cond signal received for DISCONNECT_CONF
>> == Everyone is busy/congested at this time (1:1/0/0)
>>
>>
>> Regards,
>> hauke
>>
>>
>> _______________________________________________
>> Chan-capi-users mailing list
>> Chan-capi-users at lists.melware.net
>> http://lists.melware.net/mailman/listinfo/chan-capi-users
>>
>
> _______________________________________________
> Chan-capi-users mailing list
> Chan-capi-users at lists.melware.net
> http://lists.melware.net/mailman/listinfo/chan-capi-users
More information about the Chan-capi-users
mailing list