[chan-capi-users] CAPI Problem - Call rejected
Mario Goegel
mario at goegel.net
Mon May 5 21:45:21 CEST 2008
Hi Hauke,
the switch reports to your C4, peer is busy, so there's no problem on
your isdn card - have you tried other numbers? The german gsm providers
had some problems in the last time. Tried to call yourself over the card?
Mario
Hauke Müller schrieb:
> Hello Armin et all,
>
> today our Trixbox system (fresh setup, 1 week old) stopped to dial out
> (call rejected). Inbound calls are working though.
> I'm not sure whether it's the line, capi or the card. But as inbound
> calling is working, I assume it's not the line and probably not the
> card.
>
> Any help is appreciated.
>
>
> I tried the line with capifax:
> Disconnected.
> Reason : 3495 Call rejected
> Reason-B3 : 0000 No additional information
>
> It's an AVM C4 card, here's the capiinfo for the first controller:
>
> Number of Controllers : 4
> Controller 1:
> Manufacturer: AVM GmbH
> CAPI Version: 2.0
> Manufacturer Version: 3.11-06 (49.22)
> Serial Number: 0900841
> BChannels: 2
> Global Options: 0x00000039
> internal controller supported
> DTMF supported
> Supplementary Services supported
> channel allocation supported (leased lines)
> B1 protocols support: 0x4000011f
> 64 kbit/s with HDLC framing
> 64 kbit/s bit-transparent operation
> V.110 asynconous operation with start/stop byte framing
> V.110 synconous operation with HDLC framing
> T.30 modem for fax group 3
> Modem asyncronous operation with start/stop byte framing
> B2 protocols support: 0x00000b1b
> ISO 7776 (X.75 SLP)
> Transparent
> LAPD with Q.921 for D channel X.25 (SAPI 16)
> T.30 for fax group 3
> ISO 7776 (X.75 SLP) with V.42bis compression
> V.120 asyncronous mode
> V.120 bit-transparent mode
> B3 protocols support: 0x800000bf
> Transparent
> T.90NL, T.70NL, T.90
> ISO 8208 (X.25 DTE-DTE)
> X.25 DCE
> T.30 for fax group 3
> T.30 for fax group 3 with extensions
> Modem
>
> 0100
> 0200
> 39000000
> 1f010040
> 1b0b0000
> bf000080
> 00000000 00000000 00000000 00000000 00000000 00000000
> 01000001 00010000 00000000 00000000 00000000
>
> Supplementary services support: 0x000003ff
> Hold / Retrieve
> Terminal Portability
> ECT
> 3PTY
> Call Forwarding
> Call Deflection
> MCID
> CCBS
>
>
> This is a call with Asterisk and capi debug turned on:
>
> -- Executing [s at macro-dial:7] Dial("CAPI/ISDN3#02/18911742-c",
> "CAPI/g1/01794666830|15|tr") in new stack
> > data = g1/01794666830 format=8
> > parsed dialstring: 'g1' 'NULL' '01794666830' ''
> > capi request group = 2
> == ISDN4#02: setting format alaw - 0x8 (alaw)
> > parsed dialstring: 'g1' 'NULL' '01794666830' ''
> > capi: peerlink -1 allocated, peer is unlinked
> == ISDN4#02: Call CAPI/ISDN4#02/01794666830-d (pres=0x03, ton=0x21)
> CONNECT_REQ ID=002 #0x03fc LEN=0067
> Controller/PLCI/NCCI = 0x4
> CIPValue = 0x4
> CalledPartyNumber = <80>01794666830
> CallingPartyNumber = <21 83>08995928628
> CalledPartySubaddress = default
> CallingPartySubaddress = default
> BProtocol
> B1protocol = 0x1
> B2protocol = 0x1
> B3protocol = 0x0
> B1configuration = default
> B2configuration = default
> B3configuration = default
> GlobalConfiguration = default
> BC = default
> LLC = default
> HLC = default
> AdditionalInfo
> BChannelinformation = <00 00>
> Keypadfacility = default
> Useruserdata = default
> Facilitydataarray = default
> SendingComplete = <01 00>
>
> -- Called g1/01794666830
> == ISDN3#02: Requested RINGING-Indication for CAPI/
> ISDN3#02/18911742-c
> ALERT_REQ ID=002 #0x03fd LEN=0018
> Controller/PLCI/NCCI = 0x103
> AdditionalInfo
> BChannelinformation = default
> Keypadfacility = default
> Useruserdata = default
> Facilitydataarray = default
> SendingComplete = default
>
> CAPI: ApplId=0x0002 Command=0x02 SubCommand=0x81 MsgNum=0x03fc
> NCCI=0x00000204
> CONNECT_CONF ID=002 #0x03fc LEN=0014
> Controller/PLCI/NCCI = 0x204
> Info = 0x0
>
> -- ISDN4#02: received CONNECT_CONF PLCI = 0x204
> CAPI: ApplId=0x0002 Command=0x01 SubCommand=0x81 MsgNum=0x03fd
> NCCI=0x00000103
> ALERT_CONF ID=002 #0x03fd LEN=0014
> Controller/PLCI/NCCI = 0x103
> Info = 0x0
>
> > chan_capi devicestate requested for ISDN4#02/01794666830-d
> is 'In use'
> > chan_capi devicestate requested for ISDN4#02/01794666830 is
> 'In use'
> CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0xca99
> NCCI=0x00000204
> INFO_IND ID=002 #0xca99 LEN=0015
> Controller/PLCI/NCCI = 0x204
> InfoNumber = 0x8002
> InfoElement = default
>
> INFO_RESP ID=002 #0xca99 LEN=0012
> Controller/PLCI/NCCI = 0x204
>
> -- ISDN4#02: info element CALL PROCEEDING
> -- chan_capi queue frame: [ TYPE: Control (4) SUBCLASS: Unknown
> control '15' (15) ] [ISDN4#02]
> CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0xca9a
> NCCI=0x00000204
> INFO_IND ID=002 #0xca9a LEN=0016
> Controller/PLCI/NCCI = 0x204
> InfoNumber = 0x18
> InfoElement = <89>
>
> INFO_RESP ID=002 #0xca9a LEN=0012
> Controller/PLCI/NCCI = 0x204
>
> -- ISDN4#02: info element CHANNEL IDENTIFICATION 89
> -- CAPI/ISDN4#02/01794666830-d is proceeding passing it to CAPI/
> ISDN3#02/18911742-c
> CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0xca9b
> NCCI=0x00000204
> INFO_IND ID=002 #0xca9b LEN=0015
> Controller/PLCI/NCCI = 0x204
> InfoNumber = 0x8045
> InfoElement = default
>
> INFO_RESP ID=002 #0xca9b LEN=0012
> Controller/PLCI/NCCI = 0x204
>
> -- ISDN4#02: info element DISCONNECT
> -- ISDN4#02: Disconnect case 1
> -- chan_capi queue frame: [ TYPE: Control (4) SUBCLASS: Busy
> (5) ] [ISDN4#02]
> CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0xca9c
> NCCI=0x00000204
> INFO_IND ID=002 #0xca9c LEN=0017
> Controller/PLCI/NCCI = 0x204
> InfoNumber = 0x1e
> InfoElement = <82 88>
>
> INFO_RESP ID=002 #0xca9c LEN=0012
> Controller/PLCI/NCCI = 0x204
>
> -- ISDN4#02: info element PI 82 88
> > ISDN4#02: In-band information available
> -- CAPI/ISDN4#02/01794666830-d is busy
> -- chan_capi queue frame: [ TYPE: Control (4) SUBCLASS: Unknown
> control '14' (14) ] [ISDN4#02]
> CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0xca9d
> NCCI=0x00000204
> INFO_IND ID=002 #0xca9d LEN=0017
> Controller/PLCI/NCCI = 0x204
> InfoNumber = 0x8
> InfoElement = <82 95>
>
> INFO_RESP ID=002 #0xca9d LEN=0012
> Controller/PLCI/NCCI = 0x204
>
> -- ISDN4#02: info element CAUSE 82 95
> CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0xca9e
> NCCI=0x00000204
> INFO_IND ID=002 #0xca9e LEN=0030
> Controller/PLCI/NCCI = 0x204
> InfoNumber = 0x1c
> InfoElement = <91 a1 0c 02 02 a0>E<06 06 04 00
> 87>i<01 07>
>
> INFO_RESP ID=002 #0xca9e LEN=0012
> Controller/PLCI/NCCI = 0x204
>
> -- ISDN4#02: info element FACILITY
> == ISDN4#02: CAPI Hangingup for PLCI=0x204 in state 5
> -- ISDN4#02: activehangingup (cause=21) for PLCI=0x204
> DISCONNECT_REQ ID=002 #0x03fe LEN=0013
> Controller/PLCI/NCCI = 0x204
> AdditionalInfo = default
>
> ISDN4#02: wait for DISCONNECT_CONF (0x481)
> CAPI: ApplId=0x0002 Command=0x04 SubCommand=0x81 MsgNum=0x03fe
> NCCI=0x00000204
> DISCONNECT_CONF ID=002 #0x03fe LEN=0014
> Controller/PLCI/NCCI = 0x204
> Info = 0x0
>
> ISDN4#02: found and signal for DISCONNECT_CONF
> ISDN4#02: cond signal received for DISCONNECT_CONF
> == Everyone is busy/congested at this time (1:1/0/0)
>
>
> Regards,
> hauke
>
>
> _______________________________________________
> Chan-capi-users mailing list
> Chan-capi-users at lists.melware.net
> http://lists.melware.net/mailman/listinfo/chan-capi-users
>
More information about the Chan-capi-users
mailing list