[chan-capi-users] CAPI Problem - Call rejected
Hauke Müller
hauke at mueller-martens.de
Mon May 5 21:15:31 CEST 2008
Hello Armin et all,
today our Trixbox system (fresh setup, 1 week old) stopped to dial out
(call rejected). Inbound calls are working though.
I'm not sure whether it's the line, capi or the card. But as inbound
calling is working, I assume it's not the line and probably not the
card.
Any help is appreciated.
I tried the line with capifax:
Disconnected.
Reason : 3495 Call rejected
Reason-B3 : 0000 No additional information
It's an AVM C4 card, here's the capiinfo for the first controller:
Number of Controllers : 4
Controller 1:
Manufacturer: AVM GmbH
CAPI Version: 2.0
Manufacturer Version: 3.11-06 (49.22)
Serial Number: 0900841
BChannels: 2
Global Options: 0x00000039
internal controller supported
DTMF supported
Supplementary Services supported
channel allocation supported (leased lines)
B1 protocols support: 0x4000011f
64 kbit/s with HDLC framing
64 kbit/s bit-transparent operation
V.110 asynconous operation with start/stop byte framing
V.110 synconous operation with HDLC framing
T.30 modem for fax group 3
Modem asyncronous operation with start/stop byte framing
B2 protocols support: 0x00000b1b
ISO 7776 (X.75 SLP)
Transparent
LAPD with Q.921 for D channel X.25 (SAPI 16)
T.30 for fax group 3
ISO 7776 (X.75 SLP) with V.42bis compression
V.120 asyncronous mode
V.120 bit-transparent mode
B3 protocols support: 0x800000bf
Transparent
T.90NL, T.70NL, T.90
ISO 8208 (X.25 DTE-DTE)
X.25 DCE
T.30 for fax group 3
T.30 for fax group 3 with extensions
Modem
0100
0200
39000000
1f010040
1b0b0000
bf000080
00000000 00000000 00000000 00000000 00000000 00000000
01000001 00010000 00000000 00000000 00000000
Supplementary services support: 0x000003ff
Hold / Retrieve
Terminal Portability
ECT
3PTY
Call Forwarding
Call Deflection
MCID
CCBS
This is a call with Asterisk and capi debug turned on:
-- Executing [s at macro-dial:7] Dial("CAPI/ISDN3#02/18911742-c",
"CAPI/g1/01794666830|15|tr") in new stack
> data = g1/01794666830 format=8
> parsed dialstring: 'g1' 'NULL' '01794666830' ''
> capi request group = 2
== ISDN4#02: setting format alaw - 0x8 (alaw)
> parsed dialstring: 'g1' 'NULL' '01794666830' ''
> capi: peerlink -1 allocated, peer is unlinked
== ISDN4#02: Call CAPI/ISDN4#02/01794666830-d (pres=0x03, ton=0x21)
CONNECT_REQ ID=002 #0x03fc LEN=0067
Controller/PLCI/NCCI = 0x4
CIPValue = 0x4
CalledPartyNumber = <80>01794666830
CallingPartyNumber = <21 83>08995928628
CalledPartySubaddress = default
CallingPartySubaddress = default
BProtocol
B1protocol = 0x1
B2protocol = 0x1
B3protocol = 0x0
B1configuration = default
B2configuration = default
B3configuration = default
GlobalConfiguration = default
BC = default
LLC = default
HLC = default
AdditionalInfo
BChannelinformation = <00 00>
Keypadfacility = default
Useruserdata = default
Facilitydataarray = default
SendingComplete = <01 00>
-- Called g1/01794666830
== ISDN3#02: Requested RINGING-Indication for CAPI/
ISDN3#02/18911742-c
ALERT_REQ ID=002 #0x03fd LEN=0018
Controller/PLCI/NCCI = 0x103
AdditionalInfo
BChannelinformation = default
Keypadfacility = default
Useruserdata = default
Facilitydataarray = default
SendingComplete = default
CAPI: ApplId=0x0002 Command=0x02 SubCommand=0x81 MsgNum=0x03fc
NCCI=0x00000204
CONNECT_CONF ID=002 #0x03fc LEN=0014
Controller/PLCI/NCCI = 0x204
Info = 0x0
-- ISDN4#02: received CONNECT_CONF PLCI = 0x204
CAPI: ApplId=0x0002 Command=0x01 SubCommand=0x81 MsgNum=0x03fd
NCCI=0x00000103
ALERT_CONF ID=002 #0x03fd LEN=0014
Controller/PLCI/NCCI = 0x103
Info = 0x0
> chan_capi devicestate requested for ISDN4#02/01794666830-d
is 'In use'
> chan_capi devicestate requested for ISDN4#02/01794666830 is
'In use'
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0xca99
NCCI=0x00000204
INFO_IND ID=002 #0xca99 LEN=0015
Controller/PLCI/NCCI = 0x204
InfoNumber = 0x8002
InfoElement = default
INFO_RESP ID=002 #0xca99 LEN=0012
Controller/PLCI/NCCI = 0x204
-- ISDN4#02: info element CALL PROCEEDING
-- chan_capi queue frame: [ TYPE: Control (4) SUBCLASS: Unknown
control '15' (15) ] [ISDN4#02]
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0xca9a
NCCI=0x00000204
INFO_IND ID=002 #0xca9a LEN=0016
Controller/PLCI/NCCI = 0x204
InfoNumber = 0x18
InfoElement = <89>
INFO_RESP ID=002 #0xca9a LEN=0012
Controller/PLCI/NCCI = 0x204
-- ISDN4#02: info element CHANNEL IDENTIFICATION 89
-- CAPI/ISDN4#02/01794666830-d is proceeding passing it to CAPI/
ISDN3#02/18911742-c
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0xca9b
NCCI=0x00000204
INFO_IND ID=002 #0xca9b LEN=0015
Controller/PLCI/NCCI = 0x204
InfoNumber = 0x8045
InfoElement = default
INFO_RESP ID=002 #0xca9b LEN=0012
Controller/PLCI/NCCI = 0x204
-- ISDN4#02: info element DISCONNECT
-- ISDN4#02: Disconnect case 1
-- chan_capi queue frame: [ TYPE: Control (4) SUBCLASS: Busy
(5) ] [ISDN4#02]
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0xca9c
NCCI=0x00000204
INFO_IND ID=002 #0xca9c LEN=0017
Controller/PLCI/NCCI = 0x204
InfoNumber = 0x1e
InfoElement = <82 88>
INFO_RESP ID=002 #0xca9c LEN=0012
Controller/PLCI/NCCI = 0x204
-- ISDN4#02: info element PI 82 88
> ISDN4#02: In-band information available
-- CAPI/ISDN4#02/01794666830-d is busy
-- chan_capi queue frame: [ TYPE: Control (4) SUBCLASS: Unknown
control '14' (14) ] [ISDN4#02]
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0xca9d
NCCI=0x00000204
INFO_IND ID=002 #0xca9d LEN=0017
Controller/PLCI/NCCI = 0x204
InfoNumber = 0x8
InfoElement = <82 95>
INFO_RESP ID=002 #0xca9d LEN=0012
Controller/PLCI/NCCI = 0x204
-- ISDN4#02: info element CAUSE 82 95
CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0xca9e
NCCI=0x00000204
INFO_IND ID=002 #0xca9e LEN=0030
Controller/PLCI/NCCI = 0x204
InfoNumber = 0x1c
InfoElement = <91 a1 0c 02 02 a0>E<06 06 04 00
87>i<01 07>
INFO_RESP ID=002 #0xca9e LEN=0012
Controller/PLCI/NCCI = 0x204
-- ISDN4#02: info element FACILITY
== ISDN4#02: CAPI Hangingup for PLCI=0x204 in state 5
-- ISDN4#02: activehangingup (cause=21) for PLCI=0x204
DISCONNECT_REQ ID=002 #0x03fe LEN=0013
Controller/PLCI/NCCI = 0x204
AdditionalInfo = default
ISDN4#02: wait for DISCONNECT_CONF (0x481)
CAPI: ApplId=0x0002 Command=0x04 SubCommand=0x81 MsgNum=0x03fe
NCCI=0x00000204
DISCONNECT_CONF ID=002 #0x03fe LEN=0014
Controller/PLCI/NCCI = 0x204
Info = 0x0
ISDN4#02: found and signal for DISCONNECT_CONF
ISDN4#02: cond signal received for DISCONNECT_CONF
== Everyone is busy/congested at this time (1:1/0/0)
Regards,
hauke
More information about the Chan-capi-users
mailing list