[chan-capi-users] incoming fax server Dialogic Diva V-4PRI/E1/T1-120
Mario Montiel
mariomontiel at grupocsi.com.mx
Tue Jun 3 02:23:20 CEST 2008
Yes, thanks i saw that, but fortunately it has the support fax , I have to
buy the license, in advance thanks for the help , i tell you later.
-----Mensaje original-----
De: chan-capi-users-bounces at lists.melware.net
[mailto:chan-capi-users-bounces at lists.melware.net]En nombre de Armin
Schindler
Enviado el: Lunes, 02 de Junio de 2008 01:05 p.m.
Para: chan-capi users
Asunto: Re: [chan-capi-users] incoming fax server Dialogic Diva
V-4PRI/E1/T1-120
Hello,
you have a V- card and 'V' stands for Voice. This card is for voice
connections only, fax is not supported. You need a 4PRI (without V-)
to do this.
Armin
On Mon, 2 Jun 2008, Mario Montiel wrote:
> Hello everyone, I have a question for the list, I want to put fax server
in
> asterisk to receive 120 faxes simultaneously with a card Dialogic Diva
> V-4PRI/E1/T1-120 PCI v1, i can make and recieve calls, but when i try to
> recieve fax, the console of asterisk say "CAPI INFO 0x3001: B1 protocol
not
> supported" and I do not hear anything the channel stay up, until i hangup
> the call, how i can fix this?
>
> Im using
> -Linux trixbox1.localdomain 2.6.18-53.1.21.el5 #1
> -Diva4Linux_installer_8.5-108-80.bin
> -chan-capi-HEAD
>
>
> here is the output of asterisk
>
>
> -- Executing [1 at FAX-CONTEXT:13] Set("CAPI/ISDN1#30/0505-9",
> "FAXFILE=0000000000000123200806021123543809") in new stack
> -- Executing [1 at FAX-CONTEXT:14] capicommand("CAPI/ISDN1#30/0505-9",
> "receivefax|/faxes/0000000000000123200806021123543809.sff||") in new stack
> -- capicommand: 'receivefax'
> '/faxes/0000000000000123200806021123543809.sff||'
> -- capi receivefax: '/faxes/0000000000000123200806021123543809.sff' ''
> '' ''
> -- Setup fax b3conf fmt=0, stationid='' headline=''
> DISCONNECT_B3_REQ ID=002 #0x06a8 LEN=0013
> Controller/PLCI/NCCI = 0x40a01
> NCPI = default
>
> ISDN1#30: wait for DISCONNECT_B3_CONF (0x8481)
> CAPI: ApplId=0x0002 Command=0x84 SubCommand=0x81 MsgNum=0x06a8
> NCCI=0x00040a01
> DISCONNECT_B3_CONF ID=002 #0x06a8 LEN=0014
> Controller/PLCI/NCCI = 0x40a01
> Info = 0x0
>
> ISDN1#30: found and signal for DISCONNECT_B3_CONF
> ISDN1#30: cond signal received for DISCONNECT_B3_CONF
> ISDN1#30: wait for b3 down.
> CAPI: ApplId=0x0002 Command=0x84 SubCommand=0x82 MsgNum=0x084b
> NCCI=0x00040a01
> DISCONNECT_B3_IND ID=002 #0x084b LEN=0015
> Controller/PLCI/NCCI = 0x40a01
> Reason_B3 = 0x3600
> NCPI = default
>
> DISCONNECT_B3_RESP ID=002 #0x084b LEN=0012
> Controller/PLCI/NCCI = 0x40a01
>
> ISDN1#30: found and signal for b3 down state.
> ISDN1#30: cond signal received for b3 down.
> SELECT_B_PROTOCOL_REQ ID=002 #0x06a9 LEN=0029
> Controller/PLCI/NCCI = 0xa01
> BProtocol
> B1protocol = 0x4
> B2protocol = 0x4
> B3protocol = 0x4
> B1configuration = default
> B2configuration = default
> B3configuration = <00 00 00 00 00 00>
> GlobalConfiguration = default
>
> CAPI: ApplId=0x0002 Command=0x41 SubCommand=0x81 MsgNum=0x06a9
> NCCI=0x00000a01
> SELECT_B_PROTOCOL_CONF ID=002 #0x06a9 LEN=0014
> Controller/PLCI/NCCI = 0xa01
> Info = 0x3001
>
> > ISDN1#30: CAPI INFO 0x3001: B1 protocol not supported
> CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x084c
> NCCI=0x00000a01
> INFO_IND ID=002 #0x084c LEN=0017
> Controller/PLCI/NCCI = 0xa01
> InfoNumber = 0x8
> InfoElement = <80 90>
>
> INFO_RESP ID=002 #0x084c LEN=0012
> Controller/PLCI/NCCI = 0xa01
>
> -- ISDN1#30: info element CAUSE 80 90
> CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x084d
> NCCI=0x00000a01
> INFO_IND ID=002 #0x084d LEN=0015
> Controller/PLCI/NCCI = 0xa01
> InfoNumber = 0x8045
> InfoElement = default
>
> INFO_RESP ID=002 #0x084d LEN=0012
> Controller/PLCI/NCCI = 0xa01
>
> -- ISDN1#30: info element DISCONNECT
> -- ISDN1#30: Disconnect case 3
> DISCONNECT_REQ ID=002 #0x06aa LEN=0013
> Controller/PLCI/NCCI = 0xa01
> AdditionalInfo = default
>
> CAPI: ApplId=0x0002 Command=0x04 SubCommand=0x81 MsgNum=0x06aa
> NCCI=0x00000a01
> DISCONNECT_CONF ID=002 #0x06aa LEN=0014
> Controller/PLCI/NCCI = 0xa01
> Info = 0x0
>
> CAPI: ApplId=0x0002 Command=0x08 SubCommand=0x82 MsgNum=0x084f
> NCCI=0x00000a01
> INFO_IND ID=002 #0x084f LEN=0015
> Controller/PLCI/NCCI = 0xa01
> InfoNumber = 0x805a
> InfoElement = default
>
> INFO_RESP ID=002 #0x084f LEN=0012
> Controller/PLCI/NCCI = 0xa01
>
> -- ISDN1#30: info element RELEASE COMPLETE
> CAPI: ApplId=0x0002 Command=0x04 SubCommand=0x82 MsgNum=0x0851
> NCCI=0x00000a01
> DISCONNECT_IND ID=002 #0x0851 LEN=0014
> Controller/PLCI/NCCI = 0xa01
> Reason = 0x3490
>
> DISCONNECT_RESP ID=002 #0x0851 LEN=0012
> Controller/PLCI/NCCI = 0xa01
>
> > ISDN1#30: CAPI INFO 0x3490: Normal call clearing
> -- chan_capi queue frame: [ TYPE: Control (4) SUBCLASS: Hangup (1) ]
> [ISDN1#30]
> -- capi receivefax: hangup.
> -- Closing fax file...
> capi receivefax: fax receive failed reason=0x3490 reasonB3=0x3600
> -- capi receivefax: removing fax file.
> -- Executing [h at FAX-CONTEXT:1] System("CAPI/ISDN1#30/0505-9",
> "/usr/local/bin/fax2share.sh 0000000000000123200806021123543809") in new
> stack
> == Spawn extension (FAX-CONTEXT, h, 1) exited non-zero on
> 'CAPI/ISDN1#30/0505-9'
> == ISDN1#30: CAPI Hangingup for PLCI=0xdead0000 in state 4
> == ISDN1#30: Interface cleanup PLCI=0xdead0000
> > chan_capi devicestate requested for ISDN1#30/0505-9 is 'Not in
use'
> > chan_capi devicestate requested for ISDN1#30/0505 is 'Not in use'
> > chan_capi devicestate requested for ISDN1#30/0505-9 is 'Not in
use'
> > chan_capi devicestate requested for ISDN1#30/0505 is 'Not in use'
>
> here it is my capi.conf
>
>
> ;
> ; CAPI config
> ;
> ;
>
> ; general section
>
> [general]
> nationalprefix=0
> internationalprefix=00
> rxgain=1.0 ;linear receive gain (1.0 = no change)
> txgain=1.0 ;linear transmit gain (1.0 = no change)
> language=en ;set default language
> ulaw=yes ;set this, if you live in u-law world instead of a-law
>
> ;jb..... ;with Asterisk 1.4 you can configure jitterbuffer,
> ;see Asterisk documentation for all jb* setting available.
> ;mohinterpret=default ;Asterisk 1.4: default music on hold class when
placed
> on hold.
>
>
> ; interface sections ...
>
> [ISDN1]
> ;ntmode=yes
> isdnmode=did
> incomingmsn=*
> ;defaultcid=123
> controller=1 ;capi controller number of this interface/port
> group=1 ;dialout group
> ;prefix=0 ;set a prefix to calling number on incoming calls
> softdtmf=on ;enable/disable software dtmf detection, recommended for
> AVM cards
> relaxdtmf=on ;in addition to softdtmf, you can use relaxed dtmf
> detection
> faxdetect=off
> accountcode= ;PBX accountcode to use in CDRs
> accountcode= ;PBX accountcode to use in CDRs
> ;amaflags=default;AMA flags for CDR ('default', 'omit', 'billing', or
> 'documentation')
> context=isdn-in ;context for incoming calls
> ;holdtype=hold
> ;immediate=yes
> ;echosquelch=1
> ;echocancel=yes
> echocancelold=yes
> ;echotail=64
> ;echocancelnlp=1
> ;bridge=yes
> ;callgroup=1
> ;pickupgroup=1
> ;transfergroup=1
> ;language=de
> disallow=all
> allow=all
> devices=30
>
>
>
>
>
>
> Atentamente
> Mario O. Montiel
> Gerente de Telecomunicaciones
> Tel 5999 5555 ext 3300
>
> _______________________________________________
> Chan-capi-users mailing list
> Chan-capi-users at lists.melware.net
> http://lists.melware.net/mailman/listinfo/chan-capi-users
>
_______________________________________________
Chan-capi-users mailing list
Chan-capi-users at lists.melware.net
http://lists.melware.net/mailman/listinfo/chan-capi-users
More information about the Chan-capi-users
mailing list