[chan-capi-users] Problem incoming call on austrian did

[Karsten Wemheuer]

Hi Armin,

Am Mittwoch, den 06.02.2008, 10:36 +0100 schrieb Armin Schindler:
> On Tue, 5 Feb 2008, Karsten Wemheuer wrote:
> > Hi,
> >
> > I got a problem on an did link in austria using AVM B1 and chan-capi.
> >
> > If a call from a mobile is received, I got this on the log (which is
> > ok):
> > --------------------
> ...
> > But when a call from a landline is received, the 's'-context is not
> > reached:
> ...
> >    -- ISDN-s-1#02: info element DISCONNECT
> >    -- ISDN-s-1#02: Disconnect case 3
> > INFO_IND ID=002 #0x4a13 LEN=0017
> >  Controller/PLCI/NCCI            = 0x101
> >  InfoNumber                      = 0x8
> >  InfoElement                     = <80 90>
> > --------------------
> >
> > What's wrong with it? In both cases, there is no CalledParty number. So
> > the call should enter into the 's'-extension (immediate=yes in
> > capi.conf).
> 
> These both cases are different. The second one doesn't receive a
> SENDING_COMPLETE message. But if you have configured this device
> for MSN mode and immediate=yes, it should work.
> What did you set in capi.conf? Which version of chan_capi do you
> use?
> 

The line is configured as DID. It is located in austria at a customer
site. In the first case (which works), the call is originated from a
mobile, in the second case, the originator is a landline. In both cases
the dialed number is dialed without extension (which seems irritating to
me, but our customer told me, it is normal in austria). Calls with
extension are working properly.
The version of chan-capi is SVN 554 IIRC. Immediate is set to yes.
Without this setting, any call without an extension is rejected (as it
would be in germany).

Karsten